Tripp Lite NetCommander B072-016-1 - Manual (Page 11)

11
The Auto Skip option allows you to choose whether you want inactive ports to be selectable or not. If the
Auto Skip option is turned on, inactive ports will not be accessible via the OSD main menu or the Port
Selection Hotkey commands. If the Auto Skip option is turned off, you will be able to access inactive
ports using either the OSD main menu or the Port Selection Hotkey commands.
To change the Auto Skip setting:
Highlight the Auto Skip option in the OSD General Settings menu 1.
Press [ 2. Space] to turn the Auto Skip option on/off
6.7.3 Auto Skip
11
6. Operation
(continued)
The serial port is used for the firmware upgrade. Serial Port On means the program can be used.
To change the serial port setting:
Highlight the Serial Port option in the OSD General Settings menu 1.
Press 2. [Space] to turn the Serial Port option on/off
The keyboard is preset to U.S. English. It can be changed to French (FR) or German (DE) by doing the
following:
Highlight the Keyboard Language option in the OSD General Settings menu 1.
Press [ 2. Space] to toggle through the various options
When you've selected the desired language, simply exit the OSD. Pressing [ 3. Enter] is not required to
activate your selection
The KVM Switch Name appears at the bottom of the OSD General Settings menu, and can be changed
to whatever you want. When cascading KVMs onto the NetCommander KVM Switch, it is
necessary to access the cascaded KVM's OSD using its own Hotkey. Giving cascaded KVM's OSDs
unique names makes it easier when accessing them to verify which switch's OSD you are accessing. To
change this name, simply type over the existing letters. You can create a name up to 18 characters in
length, with spaces counting as characters.
6.7 General Settings (continued)
6.7.4 Serial Port
6.7.5 Changing the Keyboard Language
6.7.6 Editing the Switch Name