Tripp Lite NetCommander B072-016-1 - Manual (Page 3)

33
Access and control multiple multi-platform computers from a single console •
Hot-swappable: disconnect and reconnect USB computers without rebooting •
Auto-scan: with variable time interval •
Compact design: 1U rack mountable •
Easy port selection using (1) On Screen Display (OSD), (2) front panel pushbuttons or (3) keyboard •
Hotkeys key sequences
Expandable: control up to 256 computers by adding additional KVM switches
•
Simple cable management: use standard Cat5/5e/6 patch cord (maximum distance 33ft) to connect to •
each computer
Multi-platform: supports PS/2 and USB computers/servers
•
Optional B050-000 IP Remote Access Unit to access the NetCommander over IP •
The NetCommander Cat5 KVM system consists of:
NetCommander Rackmountable Cat5 KVM Switch (Model B072-016-1 or B072-008-1) •
NetCommander Server Interface Unit - PS/2 (Model B078-001-PS2)* •
- USB (Model B078-001-USB)*
Cat5/5e/6 Cable (models N001-, N002-, N007-, N105-, N125- or N201-series cables)* •
RS232 Serial Cable (provided with KVM Switch) •
* Sold separately
The KVM is compatible with:
PS/2 and USB computers/servers •
VGA, SVGA, or XGA monitors •
1600 x 1200 @ 75 Hz •
DOS, Windows, LINUX, UNIX, Mac and all other major operating systems •
1. Features
4. Configuration
2. System Components
3. Compatibility
16-PORT
KVM SWITCH
MODEL: B072-016-1
SELECT
SELECTED
CPU ON
3 2 1 6 5 4 9 8 7 12 11 10 15 16 14 13
4.1 Front Panel
Figure 4.1 B072-016-1 NetCommander KVM front panel
1 Port Select Buttons: Press these buttons to toggle back and forth between ports. Pressing both select
buttons at the same time also performs a system reset.
2 "Port Selected" LED: The "Port Selected" LED will illuminate above the port that is currently
selected.
3 "CPU On" LED: The "CPU On" LEDs will illuminate for all ports that have a server connected
(server must be powered on).
1 2 3