Tally Genicom T5023+ - Manual (Page 79)

Standard commands Vertical print control
T5023/5023+ - Programming Guide 69
Setting the bottom margin
Function:
ESC N (n) sets a bottom margin of n lines in the currently valid line spacing. The
standard document length (presetting of the printer) or the document length set
by ESC C (document length in lines) or by ESC C NUL (document length in
inches) serves as the basis.
A value between 0 and 127 can be selected for n. The margin resulting from this must
be smaller than the document length.
When the bottom margin is reached, a document ejection is automatically start-
ed.
ESC
27
1B
N
78
4E
(n)
n
n
ASCII character
Decimal
Hexadecimal