Tally Genicom T5023+ - Manual (Page 66)

Line feed commands Standard commands
56 T5023/5023+ - Programming Guide
Line feed
Function:
On receipt of the command LF (line feed) the data contained in the buffer is printed
and the paper transported one line further according to the current line spacing
.
LF
10
0A
ASCII character
Decimal
Hexadecimal
– If after LF the logical bottom edge of the sheet is exceeded (depen-
ding on the set document format), the document is ejected.
– If a bottom margin set using ESC N (n) is exceeded, the document
is also ejected.
– The horizontal position is set back to the left margin (CR).
i