Tally Genicom T5023+ - Manual (Page 295)

Loadable Firmware/Character Generators Loading character generators
T5023/5023+ - Programming Guide 285
Loading the Character Generator
Function:
$MOD$ is a part of the file and may not be transferred again before the data.
Data is transferred after the character sequence $MOD$. It is not allowed to load
other data than data with the file extension .FNT. A checksum is placed at the
end of the file. After the load process this checksum can be used to verify that
the load process was successful.
If the data was transferred without errors, the relevant data ID is provided in the
ESC I D acknowledgment.
$
36
24
M
77
4D
O
79
4F
D
68
44
$
36
24
ASCII chars
Decimal
Hexadecimal