Toshiba B-SX600 SERIES - Manual (Page 92)

12. TROUBLESHOOTING
12- 6
■ The print position gradually misaligns.
Possible causes Solutions / Reference
The label pitch or black mark
pitch of the media is not
accurate. Unless the label pitch or black pitch is accurate, the print
position will become misaligned.
Do not use such media.
⇒
3. MEDIA AND RIBBON
The Platen is dirty. Clean the Platen.
⇒
11.2 Cleaning the Platen
The media calibration is not
performed properly. If Easy or Strict feed mode is selected in the media settings
in the printer driver, perform a calibration again.
⇒
7.4 Media Calibration
Fixed Length feed mode is
selected. Select Easy or Strict feed mode in the printer driver to
perform printing in accordance with gaps, black marks, or
notches.
⇒
7.1 Media Feed Mode