Toshiba B-SX600 SERIES - Manual (Page 65)

8- 1
8. OPERATION PANEL
This section describes the functions of the LCD Message Display, LED’s and keys on the Operation
Panel.
8.1 Operation Panel
The Operation Panel is equipped with the LCD Message Display, which is used to indicate the state of
the printer, 4 LED’s, and 9 keys. Please see the table below for details.
Name Functions (Purposes)
LCD Message Display Shows the menu or error information.
Power LED Illuminates in green when the printer is turned on.
Ready LED Illuminates in green when the printer is ready, and goes out when the
printer is in a pause state or while the menu is being displayed.
Error LED Illuminates in red when an error occurs, and flashes in red in the event
of a warning.
Data LED Flashes in green when data is received, and illuminates in green when
data is in the receive buffer.
[Pause] key Used to place the printer in a pause or ready state.
[Feed] key Used to feed the media for a single page or label length.
[Menu] key Used to display the menu when the printer is in a ready or pause state.
When held down, the [Menu] key will be locked, and when held down
again, it will be unlocked.
◄key Used to choose an item on the left while the menu is being displayed.
►key Used to choose an item on the right while the menu is being displayed.
▲key Used to choose an item above while the menu is being displayed.
▼key Used to choose an item below while the menu is being displayed.
When the model with the Cutter Unit is used, holding down this key in a
ready or pause state causes the media to be cut.
[Enter] key Used to determine the settings while the menu is being displayed.
[Cancel] key Used to clear an error when it occurs.
When held down, print data is cleared.