Toshiba B-SX600 SERIES - Manual (Page 13)

1. PRODUCT OVERVIEW
1- 6
1. Do not touch the Print Head or around it just after printing. You may get burned as the Print Head
becomes very hot during printing.
2. Do not touch any moving parts. To reduce the risk of fingers, jewellery, clothing, etc., being drawn
into the moving parts, be sure to load the media once the printer has stopped moving completely.
3. To avoid injury, be careful not to trap your fingers while opening or closing the cover.
1.3.4 Interior
Lower unit
1. Media End Sensor
2. Media Holder
3. Media Roll Damper
4. Media Roll Guide
5. Media Guide
6. Reflective Media Sensor
7. Transmissive Media Edge Sensor
8. Platen
9. Transmissive Media Centre Sensor
10. Print Head
2
1
3
4
7
6
5
8
9
10
WARNING!