Toshiba B-SX600 SERIES - Manual (Page 41)

5. LOADING THE MEDIA
5- 4
11. Select an appropriate media sensor in accordance with the type of the loaded media. Place
the sensor in a right position.
[Supplemental Remarks]
Refer to section 3. MEDIA AND RIBBON for further information regarding the combination of
the media type and the sensor to be used.
12. Draw the media frontward. Adjust both sides of the leading edge of the media so that the
media is centred above the scale.
13. Lower the Media Holder Plate. Push up the Upper Unit Unlock Lever and close the Upper
Unit.
Scale
Reflective Media Sensor
Transmissive Media Edge Sensor
Transmissive Media
Centre Sensor