Toshiba B-SX600 SERIES - Manual (Page 38)

5- 1
5. LOADING THE MEDIA
This section describes how to load the media.
Before using the Peel-off Unit or fanfold paper, please read Section 5.1 How to Load the Media
carefully first. Then, refer to section 5.2 How to Load the Paper for the Model with the Peel-off
Unit or section 5.3 How to Load Fanfold Paper.
5.1 How to Load the Media
1. Open the Side Cover completely.
2. Push up the Upper Unit Unlock Lever to
unlock the Upper Unit. Hold and lift the
Upper Unit Handle until it is locked.
3. While squeezing the Unlock Levers of the
Media Roll Holder, slide the Media Roll Holder
outside.
Unlock Lever
Upper Unit
Upper Unit
Unlock Lever
1. Do not touch any moving parts. To reduce the risk of fingers, jewellery, clothing, etc., being
drawn into the moving parts, be sure to load the media once the printer has stopped moving
completely.
2. The Print Head becomes hot immediately after printing. Allow it to cool before loading the
media.
3. Care must be taken not to catch your fingers in the covers when opening or closing them.
WARNING!
NOTE:
For the specification of available media, refer to Section 3.1 Supply Specifications.
Media Roll Holder