Toshiba B-SX600 SERIES - Manual (Page 58)

7. PRINTER OPERATION
7- 5
7.3 Page Alignment
Page alignment is a function to advance the loaded media to a print start position.
A page alignment is performed under any of the following conditions when the printer is placed in
either Easy or Strict feed mode.
* If Fixed Length feed mode is selected, please refer to Page Alignment when Fixed Length
feed mode is selected described later.
■ Page alignment is performed:
● When requested from the printer driver.
● After an error is cleared
● After the Upper Unit is opened then closed
● When the printer is turned on (with “Precise print mode” selected)
● When printing is performed after the following settings are changed:
･ Media length
･ Page offset
･ Sensor type
･ Result of the media calibration (Lc, FL, Lo, UP)
* The operation of the page alignment function varies depending on the option (“Precise print
mode” and “Paper saving mode”) selected from the “TOF After Booting” menu on the
Operation Panel.