Toshiba TLP560 - Manual (Page 63)

63
Maintenance
CONTENTS
Air filter cleaning (continued)
Mount the air filter and the filter frame.
Place the air filter in the projector, then insert the four tabs on the filter frame
into the holes in the projector.
Mount the front cover.
Insert the hooks of the front cover into the projector first, then slide it to the
lens side to fix it.
5
6
2
1
Air filter Filter frame
Notes
• When the air filter is dusty, the ventilation is
impaired. This causes the temperature inside the
projector to rise, and may damage the unit.
• Attach the air filter and the filter frame firmly after
the cleaning. If it is not set correctly, the dusts will
enter and they will be projected and overlapped on
the picture.
• If you wash the air filter with water, be sure to let it
dry fully before reinstalling it. Using it damp will
result in malfunction.
• If the air filter is damaged, contact your store of
purchase and replace it with a new one. Using a
damaged air filter will cause dust or dirt to get
inside the projector and onto the images.
Front cover
1
2