Connecting a computer, 23 installation and connections – Toshiba TLP560 User Manual
Page 23
23
Installation and
connections
Notes
• The projector cannot be connected to a computer without an analog RGB connector. For details, refer to the computer manual.
• You may not be able to connect some computers to the projector. For details, consult the dealer.
• When connecting to a Macintosh computer, some models may need a Mac adapter for connection.
• Some computers may have output modes which are not compatible with this projector. Check the compatibility of the connectors, signal levels, timing,
resolutions, etc.
Connecting a computer
You can project the picture from the computer.
Check that the power supplies for the projector and for the computer are off before connecting the cables.
COMPUTER IN connector
For use as both analog RGB and Y/P
B
/P
R
input. At shipping from factory, it is
set for use as analog RGB input.
AUDIO IN jack
For use as audio signal of all input sources.
RGB cable (supplied)
To AUDIO IN jack
Computer
To COMPUTER IN connector
Be sure to connect in the proper
direction.
To monitor port
Audio cable (supplied)
ø3.5mm stereo mini-jack
To audio output port
USB
AUDIO IN
CONTROL
S-VIDEO IN
VIDEO IN
COMPUTER OUT
( Y/P
B
/P
R
)
COMPUTER IN
( Y/P
B
/P
R
)
USB
AUDIO IN
CONTROL
S-VIDEO IN
VIDEO IN
COMPUTER OUT
( Y/P
B
/P
R
)
COMPUTER IN
( Y/P
B
/P
R
)