Toshiba TLP560 - Manual (Page 53)

53
CONTENTS
Adjustments &
Settings
PIP menu setting
Return the settings of PIP MENU to the factory default setting.
Select the signal source for PIP sub-picture.
Set the PIP sub-picture size.
: Video input is selected as signal source.
: S-Video input is selected as signal source.
: The PIP sub-picture size is set to small.
: The PIP sub-picture size is set to medium.
: The PIP sub-picture size is set to large.
Set the PIP sub-picture display position.
:The sub-picture is displayed at the upper left of the screen.
:The sub-picture is displayed at the upper right of the screen.
:The sub-picture is displayed at the lower left of the screen.
:The sub-picture is displayed at the lower right of the screen.
Reset EXEC.
Source
SET Video
SET S-Video
Size
SET Small
SET Medium
SET Large
Position
SET
SET
SET
SET
When a PIP sub-picture is displayed, the PIP menu screen will appear if you press the MENU button.
You can make the PIP sub-picture settings when a PIP subpicture is displayed.
To cancel the menu, press the EXIT button.
Notes
• The size of the PIP sub-picture differs according to the signal type (resolution) of the main picture.
• The settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is unplugged or if a
power failure occurs while the projector is on, the settings are not memorized.