Operations, Projection on the screen, 28 operations – Toshiba TLP560 User Manual
Page 28: Press on/standby, Contents preparation, Continued, Install and connect the projector properly, Take off the lens cover
28
Operations
Preparation
1
Install and connect the projector properly.
2
Take off the lens cover.
Press ON/STANDBY.
The projector turns on and the ON, LAMP and FAN indicators
light in green.
(The LAMP indicator blinks while the lamp is warming up.)
The lamp lights and the start up display appears.
CAUTION – Do not look into the projection
lens while operating the projector.
Projection on the screen
ON / STANDBY
FAN
TEMP
LAMP
ON
ON / STANDBY
FAN
TEMP
LAMP
ON
(Green)
(Green)
(Green) (Green)
(Green)
(Green
Flashing)
1
Continued
MENU
ON /
INPUT
ENTER
CT-90106
KEYSTONE
AUTO SET
EXIT /
P.MODE
P I P
FREEZE
MUTE
CALL
RESIZE
VOL / ADJ
STANDBY
1
1
1
K
EY
ST
O
N
E
AU
TO
SE
T
EXIT
ON / STANDBY
VOL / ADJ
ENT
ER
M
EN
U
IN
P
U
T
FAN
TEMP
LAMP
ON
Indicators
Remote control
Control panel
(Main unit side)
ON/STANDBY
ON/STANDBY
Notes
• The startup screen disappears when you push the EXIT button or wait for a while. You can also
set the startup screen not to be displayed on the menu screen.
• When a projector is used for the first time, the language selection menu is displayed after the
startup screen disappears. Set it up with procedures 2 and 3 on the next page.