Toshiba TLP560 - Manual (Page 41)

41
Operations
CONTENTS
Operating the presentation mode
Notes
• This function is available with O.S (operating system) of Windows 98/98SE, Windows Me, Windows 2000, Windows XP or Mac OS9 with a USB port as
standard.
• When connecting to the computer’s USB port for the first time, a message asking you to insert the Windows98 or Windows 98SE CD-ROM may appear
on the computer’s monitor screen, depending on whether or not the device driver is installed. If so, do as the message says.
• When using a USB cable other than the supplied one, be sure to use a shielded type.
You can change the slide, for the presentation on the computer, by using the remote control when connecting the projector to the computer with
the supplied USB cable.
USB AUDIO IN CONTROL VIDEO IN
To USB connector
Be sure to connect in the proper direction.
USB cable (supplied)
Computer for presentation
To USB port
USB connector
1 Connect a computer to the projector with the supplied USB cable.
Also connect the RGB cable and the audio cable if necessary. 23
2 Start a presentation on the computer.
• In case of Microsoft ® PowerPoint ® , start the slide show to make a state of displaying the first slide.
• In case of Adobe ® Acrobat ® or AcrobatReader ® , make state that [Full Screen] is selected from [View] menu.
• This function is also available in other application software that can change a slide by pressing , of a
computer.
Continued