Toshiba TLP560 - Manual (Page 45)

45
CONTENTS
Adjustments &
Settings
GUIDE MENU adjustments and settings
Adjust the contrast of the picture.
Adjust the brightness of the picture.
Adjust the flicker of the picture. (Sampling clock phase adjustment)
The picture is set with its brightness priority.
The picture is set with its color quality priority.
Adjust the keystone distortion.
Adjust the color depth of the picture.
Adjust the document imaging camera's gain.
Select a shutter speed below to decrease the flickering of the document imaging camera's picture.
The shutter speed is set automatically.
The shutter speed is fixed to 50 Hz.
The shutter speed is fixed to 60 Hz.
: COMPUTER IN connector is selectable with the INPUT button.
: Video input is selectable with the INPUT button.
: Use COMPUTER IN connector as Analog RGB input.
: Use COMPUTER IN connector as Y/P
B /P R input.
: S-Video input is selectable with the INPUT button.
: Camera input is selectable with the INPUT button.
Yes (common for all of the inputs)
Yes (common for all of the inputs)
-
-
-
Yes
Yes
-
-
-
-
Yes
Yes
-
-
-
-
Yes
Yes
-
Yes
Yes
-
Yes
-
-
Yes
-
-
Yes
-
Yes
Y/P B /P R Video
The relationship between input source and item Yes: Adjustable -: Not displayed
S-Video Camera Analog RGB
Adjust the image brightness. Contrast
Brightness ADJ.
ADJ.
Adjust the image flicker. Phase ADJ.
Select the image with its brightness
priority or quality (color) priority. Bright SET
True color SET
Correct the keystone distortion
of the screen. Keystone ADJ.
VIDEO SET
Select the input source when
changing the input. SET COMPUTER
SET Analog RGB
SET Y/P B /P R
S-VIDEO SET
CAMERA SET
Adjust the image color. Color ADJ.
Camera gain ADJ.
Shutter
SET Auto
SET 50Hz
SET 60Hz
: On/Off with ENTER
: On/Off with ( ) or ( )
Adjust the gain of the document imaging camera.
Reduce the flicker.
On GUIDE MENU, you can set or adjust the functions frequently used.
To operate GUIDE MENU, refer to page 43 .
Notes
• The items related to the camera (the document imaging camera) are displayed only with models having a camera.
• “Sampling phase” is adjusted and memorized for each RGB signal
70 .
• “Keystone” and “Input source setting” can be adjusted (set) at all input sources, but the adjustments (settings) made at one input source are applied to all
input sources.
• It is impossible to exit from the menu if no input source is selected.
• If the check in the check box for the currently selected source is removed, the setting becomes effective the next time the input is changed.
• The adjustments or settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is
unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not memorized.