Toshiba GA-1190 - Manual (Page 42)

5 CONFIGURING NETWORKS (EQUIPMENT)
40 IPX/SPX Configuration
IPX/SPX Configuration
You can configure IPX/SPX protocol. The IPX/SPX protocol is configured usually to communi-
cate with a NetWare file server.
1
Press the [USER FUNCTIONS]
button when the ready screen
is displayed.
The “user functions mode” main screen
appears.
2
Press or to select INI-
TIAL SETUP, and then press
the [ENTER] button.
3
Press or to select NET-
WORK, and then press the
[ENTER] button.
4
Press or to select IPX/
SPX, and then press the
[ENTER] button.
5
Press or to select IPX/
SPX, and then press the
[ENTER] button.
6
Press or to select
ENABLE, and then press the
[ENTER] button.
The screen returns to the one shown in
step 5.
7
Press or to select
FRAME TYPE, and then press
the [ENTER] button.
USER FUNCTIONS 00001216
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
INITIAL SETUP
03.DRAWER SET POP-UP
04.TERMINAL ID
05.NETWORK
NETWORK
04.IPX/SPX
05.APPLE TALK
06.HTTP
IPX/SPX
01.IPX/SPX
02.FRAME TYPE
IPX/SPX
1.ENABLE
2.DISABLE
IPX/SPX
01.IPX/SPX
02.FRAME TYPE