Toshiba GA-1190 - Manual (Page 35)

Ethernet Configuration 33
Ethernet Configuration
You can specify the link speed and communication mode of Ethernet.
1
Press the [USER FUNCTIONS]
button when the ready screen
is displayed.
The “user functions mode” main screen
appears.
2
Press or to select INI-
TIAL SETUP, and then press
the [ENTER] button.
3
Press or to select NET-
WORK, and then press the
[ENTER] button.
4
Press or to select ETH-
ERNET, and then press the
[ENTER] button.
5
Press or to select LINK
SPEED/DUPLEX MODE, and
then press the [ENTER] but-
ton.
6
Press or to select the
desired link speed and com-
munication mode.
USER FUNCTIONS 00001216
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
INITIAL SETUP
03.DRAWER SET POP-UP
04.TERMINAL ID
05.NETWORK
NETWORK
01.COMPLETE
02.ETHERNET
03.TCP/IP
ETHERNET
01.LINK SPEED/DUPLEX MODE
LINK SPEED/DUPLEX MODE
1.AUTO
2.10BASE/HALF
3.10BASE/FULL
LINK SPEED/DUPLEX MODE
3.10BASE/FULL
4.100BASE/HALF
5.100BASE/FULL