Toshiba GA-1190 - Manual (Page 39)

TCP/IP Configuration 37
10
Press the [CANCEL] button once or press the [FUNCTION CLEAR]
button to return the screen to the “user function mode” main
screen.
You can check the configuration status and the obtained value if you print out the NIC
status page.
P.29 “NIC status page”
Manual IP address assignment
1
Press the [USER FUNCTIONS]
button when the ready screen
is displayed.
The “user functions mode” main screen
appears.
2
Press or to select INI-
TIAL SETUP, and then press
the [ENTER] button.
3
Press or to select NET-
WORK, and then press the
[ENTER] button.
4
Press or to select TCP/
IP, and then press the [ENTER]
button.
5
Press or to select
ADDRESS MODE, and then
press the [ENTER] button.
USER FUNCTIONS 00001216
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
INITIAL SETUP
03.DRAWER SET POP-UP
04.TERMINAL ID
05.NETWORK
NETWORK
01.COMPLETE
02.ETHERNET
03.TCP/IP
TCP/IP
01.ADDRESS MODE
02.IP ADDRESS
03.SUBNET MASK