Trango Broadband Access5830 User Manual
Page 64
Management
Trango Broadband Wireless — Access5830 User Manual Rev. F
page 60
Command Description
AP/S
U Remarks
tftpd [
enable or disable TFTPD service
time
display current time
Both
time
set current time
0..59
AP
tm
display current time mark
Both
updateflash _loader+
For updating the radio’s loader
firmware.
Gets loader image from TFTP buffer
and writes to flash memory at loader
image section.
AP
This command is rarely used
since the loader firmware does
not often require updating.
updateflash
For updating radio’s main firmware
or FPGA firmware. Gets firmware
image from TFTP buffer, verifies
checksum, and writes to flash
memory at main or FPGA image
section.
Both
Examples:
updateflash mainimage 483985
1092844
updateflash fpgaimage 83383
393D38
uniimaxpower [
set max TX power limit
SU
For M5830S-SU-EXT only.
Example: uniimaxpower 6
This command is used to set the
maximum power output of the
radio while it is operating in the
U-NII band.
updateflash sudb
write current SU database into flash
memory at SUDB section
AP
updateflash systemsetting
write current configuration into flash
memory at system configuration
section
Both
same results achieved with
abbreviated command: save ss
ver
displays firmware version info
1. version number and date
code
2. Firmware
and
FPGA
version code
3. Firmware and FPGA image
checksum
Both