Toshiba Copier - Manual (Page 60)

HOW TO USE THE FAX FUNCTION 4-24
You can avoid wasting fax paper by using the Anti Junk Fax function. This function
prevents the reception of faxes from up to ten specified parties.
Factory setting : 2 (OFF)
To turn the Anti Junk Fax feature on and off, use the following procedure:
Step Press these keys Comments
1
“ANTI JUNK FAX” will
appear in the display.
2
“ANTI JUNK SELECT” will
appear in the display.
3
Turn Anti Junk Fax on or
off.
4
Press the STOP key twice
to exit.
To cancel a timer operation:
If you need to cancel a timer operation after it has been set, follow the steps below:
If the timer operation is a transmission operation, you will need to know the number
assigned to it. If you do not remember the number (it appears in the display when you
set the operation), print out the Timer List. See “Printing Out Reports” in this chapter
for details on how to print out the Timer List.
Step Press these keys Comments
1
“TIMER MODE” will
appear in the display.
2
Select “CLEAR”. “ENTER
# (1-3)” will appear in the
display.
3
Enter the 1-digit number
assigned to the operation.
4
“CLEARED” will appear in
the display.
5
Press the STOP key twice
to exit.
Anti Junk Fax
Special Functions
(example)
FUNCTION
ABC
ENTER
STOP STOP
FUNCTION
ENTER
MNO
ABC
or
STOP STOP