Toshiba Copier - Manual (Page 52)

HOW TO USE THE FAX FUNCTION 4-16
Special functions
When using the original table :
1
Confirm that there are no
documents in the ADF and that
copying is not in progres, then
gently close the original cover.
2
Place the document face down on
the original table. Align the
document according to the
original scale in the illustration
below. (Line up the center of the
edge of the document with the ( )
mark.
• Adjust the resolution and/or
contrast settings if desired.
3
Gently close the original cover.
Note : When using the original table, do not set documents in the ADF.
4
Press the BOOK SEND key to
scan the page into memory.
5
Select the document size from
those displayed.
• Adjust the resolution and/or
contrast settings if desired.Note
however that you cannot use the
HALF TONE resolution setting
with B4 size documents.
6
Press the BOOK SEND key. If you
have more than one sheet to read
into mmory, place the next page,
and press the BOOK SEND key to
read each page.
7
Continue with steps 4 ad 5 in the
previous section, “Using the ADF”.
mark
Original scale
Note : If the document is removed from te document tray after a transmission
reservation is set, the reservation will be canceled.