Toshiba Copier - Manual (Page 24)

INITIAL SETTINGS 2-16
Setting Fine Resolution Priority
The unit is set to automatically begin reception if you pick up from an extension
telephone and the unit detects a fax tone. However, if you are using a modem on the
same line, you must deactivate this function : otherwise the unit will mistakenly attempt
to receive the transmission from your computer. To turn of the Fax Signal Receive
function, follow the procedure below.
Note: If you turn off the Fax Signal Receive function, be sure to activate the Remote
Reception function. See “Using the Remote Reception Function” on the next
page for details on how to do this.
Factory setting: 1 (ON)
Step Press these keys Comments
1
“OPTION SETTING” will appear
in the display.
2
“FAX SIGNAL RECEIVE” will
appear in the display.
3
Press 1 to turn Fax Signal
Receive on, or 2 to turn it off.
4
Press the STOP key twice to
exit.
Fax Setup
For most faxing jobs, you will most likely want to specify the resolution. However,
you can also set a default resolution when no setting is made using the RESOLU-
TION key. When Fine Resolution Priority is turned on, all faxes will be sent in Fine
Mode unless otherwise specified. To turn on this function, follow the procedure
below:
Factory setting: 2 (OFF)
Step Press these keys Comments
1
“OPTION SETTING” will appear
in the display.
2
“FINE PRIORITY” will appear in
the display.
3
Press 1 to turn Fine Resolution
Priority on, or 2 to turn it off.
4
Press the STOP key twice to
exit.
or
Setting Up the Unit for Use with a PC Modem
FUNCTION GHI
ABC
STOP STOP
DEF
FUNCTION GHI
or
ABC
STOP STOP
ABC