Optional transmission settings, How to use the fax function, Resolution – Toshiba Copier User Manual

Page 39: Sending documents, Half tone, Standard, Fine, S. fine, Your fax has four resolution settings

HOW TO USE THE FAX FUNCTION

4-3

There are several transmission settings that you can make before dialing and
transmitting a document.

Resolution

Your fax has four resolution settings:

• HALF TONE

Use HALF TONE for photographs and illustrations. The original will be reproduced
in 256 shades of gray.

• STANDARD

Use STANDARD for ordinary documents. This setting gives you the fastest
transmission.

• FINE

Use FINE for improved reproduction, especially with documents containing small
letters or fine drawings.

• S. FINE

Use SUPER FINE when you need the highest quality of reproduction.

If you do not change the setting, the document will automatically be sent in
STANDARD mode.

Note: If the document is B4 size, you cannot use the HALF TONE setting in the

following situations :

• With the Memory function

• For a Broadcast operation
• For a Timer operation
• For sending from the original table
• With the Memory Polling function

Contrast

The fax automatically controls the contrast, but you can also control it manually. To
do this, press the CONTRAST key one or more times until the desired contrast settings
appear in the display. The three contrast levels are light, medium, and dark.

Optional Transmission Settings

AUTO
MANUAL
A.M.

BOOK SEND

RESOLUTION CONTRAST

BROADCAST

RECEPTION

MODE

FUNCTION

ENTER