beautypg.com

Using windows remote desktop, Telnet server – Tandberg Data NAS Hardware Viking FS-1500 User Manual

Page 16

background image

Tandberg Data

Setting Up & Administration

__________________________________________________________________________________________________

2-2

Tandberg Viking Series Storage Server Administration Manual

2.1. Using Windows Remote Desktop

Remote Desktop is provided to allow for additional remote system
administration and installation of approved third-party applications. Backup
software and antivirus programs are examples of approved applications.

To open a Remote Desktop session from a connecting machine using
Windows XP:

• Select Start > Run. At Open, type mstsc, then click OK.

• Type the IP address of the NAS appliance you will be connecting to

in the Computer box and click Connect.

• Use the default user name “Administrator” and default password

“1234” to gain system access.



Notes

Two open sessions of Remote Desktop are allowed to operate at the same time.
After completing an application do not use the window close feature (X) to close that
session of Remote Desktop. Click Start then Log Off Administrator to exit Remote
Desktop.

2.1.1. Improper Closure of Remote Desktop

Certain operations can leave the utilities running if the browser is closed
versus exiting from the program via the application menu or logging off the
Remote Desktop session. A maximum of two Remote Desktop sessions may
be used at any given time. Improper exit from a session can result in the
sessions becoming consumed. Sessions and processes can be terminated
using the Terminal Services Manager via Start > Programs >
Administrator Tools.

Note

The Terminal Services Manager must be accessed via the direct attached method.


2.2. Telnet

Server

Telnet Server is a utility that lets users connect to machines, log on, and
obtain a command prompt remotely. Telnet Server is preinstalled on the
storage server, but must be activated before use.

Notes

For security reasons, the Telnet Server is disabled by default. The service needs to
be modified to enable access to the storage server with Telnet.


This manual is related to the following products: