Toshiba P100/P105 User Manual
Page 163
163
Toshiba Utilities
TOSHIBA Hardware Setup
5.375 x 8.375 ver 2.3
❖
Display—Allows you to change various default settings
for the built-in LCD display
When the computer restarts, it remembers the last
configuration. If data does not appear on the display you are
using after starting in Standby Mode, press Fn + F5.
❖
Boot Priority—Allows you to change the sequence in
which your computer searches the drives for the
operating system.
You can also manually choose the Boot Priority by pressing
the power button, then quickly pressing the F12 key, or the
right or left arrow keys.
Select the boot device icon by pressing the right or left arrow
keys, then pressing the Enter key.
Since the system is a quick-booting system, you must press
the arrow keys immediately after pressing the power button.
❖
Keyboard—Allows you to configure an external PS/2
keyboard to emulate the
Fn
function key and access the
wake-on keyboard function.
❖
USB—Allows you to enable or disable USB Legacy
Emulation.
❖
LAN—Allows you to set networking functions.
By changing any of the options that appear in the dialog
boxes and clicking Apply, you can reconfigure that function.
Any options that you change will become default settings
when you restart your system.
NOTE
NOTE