Specifications, Audio input ratings, Audio performance – Tascam DR-100 User Manual
Page 50: Accessory (sold separately), Requirements for connected computers, 12–specifications
50
TASCAM DR-100
12–Specifications
Audio input ratings
º XLR MIC IN (L, R) inputs
Connectors: XLR-3-32equivalent (balanced)
Input impedance: 1.2 kΩ
≠ GAIN HIGH setting
Standard input level: -58 dBu
Maximum input level: -42 dBu
≠ GAIN MID setting
Standard input level: -36 dBu
Maximum input level: -20 dBu
≠ GAIN LOW setting
Standard input level: -14 dBu
Maximum input level: +2 dBu
º LINE IN input
Connector: 3.5 mm stereo minijack
Input impedance: 23 kΩ
Standard input level: -10 dBV
Maximum input level: +6 dBV
º LINE OUT output
Connector: 3.5 mm stereo minijack
Standard output level: -10 dBV
Maximum output level: +6 dBV
º output
Connector: 3.5 mm stereo minijack
Maximum output : 25 mW + 25 mW
(with 32 Ω headphone connection)
º Built-in speakers
Output: 0.4 W
Audio performance
Frequency response (LINE IN > LINE OUT):
20 Hz–20 kHz, +1/-3 dB (44.1 kHz)
20 Hz–22 kHz, +1/-3 dB (48 kHz)
Distortion (LINE IN > LINE OUT):
Less than 0.01%
S/N ratio (LINE IN > LINE OUT):
90 dB or more
º Compatible audio files:
MP3 files: 32–320 kbps, sampling frequency 44.1/48 kHz,
VBR playback, ID3 tag support up to Ver 2.4
WAV files: sampling frequency 44.1/48 kHz,
bit length: 16/24-bit
º Recording media:
SD cards (64 MB–2 GB) and SDHC cards (4 GB–32 GB)
º File system:
FAT partition: FAT16/32
º Battery life (continuous operation):
Lithium ion battery (BP-L2):
About 5 hours (recording time)
About 5 hours (playback time)
Ni-MH batteries (HR15/51):
About 4 hours (recording time)
About 4 hours (playback time)
Alkaline batteries (LR6):
About 2 hours (recording time)
About 2 hours (playback time)
(Backlight off, set to 128-kbps mp3.
Varies according to use conditions.)
º Operation temperature range:
0–40º C
º Power consumption:
1.7 W (MP3 playback)
5.5 W (maximum)
º
External dimensions (mm):
80 (w) x 153
(h) x 35
(d) (excluding protrusions)
º Weight:
290 g (not including batteries)
Accessory (sold separately)
º AC adapter:
PS-P520
Requirements for connected
computers
º Windows:
Pentium 300 MHz or better
128 MB or more memory
USB port (USB 2.0 recommended)
º Macintosh:
266 MHz Power PC, iMac, G3, G4 or better
64MB or more memory
USB port (USB 2.0 recommended)
º Recommended USB host controller:
Intel chipset
º Supported OS:
Windows: Windows 2000 Professional SP4 or newer,
Windows XP, Windows Vista
Macintosh: Mac OS X 10.2 or newer