Tascam DR-100 - Manual (Page 19)

TASCAM DR-100
19
4–Preparation for Use
Using the remote control
Wireless use
Point the remote control at the remote control
receiver on the unit.
CAUTION
If anything is between the remote control and the
receiver, operation might not work.
Remote control receiver
Operation distance
Wired use
Attach the remote control adapter and cable
1 Insert the wireless remote control into the
remote control adapter.
2 Connect the cable to the remote control adapter.
3 Connect the cable to the main unit.
Precautions for use of the remote control
Remove the battery when you are not using the
remote control for a long time (one month or
more).
If the battery should leak, thoroughly clean any
residue from inside the battery compartment and
install a new battery.
When using other devices controlled by infrared
rays, use of this remote control might operate
these devices by mistake.