Tascam DR-100 - Manual (Page 10)

10
TASCAM DR-100
2–Quick Start Guide
Follow these steps to use the built-in mics (UNI
MIC) to record and playback your recording.
Turn the power on
1 Prepare the power supply.
To use battery power, install a charged lithium
ion battery or AA batteries. (See “Using with
batteries” on page 17.)
Types of batteries that can be used
Lithium ion battery (included) •
AA alkaline batteries (LR6) •
AA Ni-MH batteries (HR15/51) •
NOTE
Manganese dry cell batteries (R6) cannot be used •
with this unit.
This unit cannot recharge Ni-MH batteries. Use a
•
commercially available recharger.
Installation of the lithium ion battery
Installation of the AA batteries
Never use any adapter other than the designated
PS-P520 AC adapter. (See "Using an AC adapter
(sold separately)" on page 18 .) Use of a different
adapter could cause malfunction, fire or electric
shock.
(sold separately) AC outlet
DC plug
2 Insert an SD card.
Insert a new SD card or one that has been
formatted for use with this unit. (See “Inserting
and removing SD cards” on page 20.)
NOTE
An SD card is already installed when the unit is •
shipped from the factory. If you want to use this
card to record and play tracks, there is no need to
reinstall it.
The included SD card is already formatted.
•
3 Turn the power ON.
Press and hold the
POWER key to turn the power
ON.