Play and stop playback, Turn the power off, 2–quick start guide – Tascam DR-100 User Manual
Page 12
12
TASCAM DR-100
2–Quick Start Guide
Play and stop playback
Follow these steps to listen to a recording using
the built-in speaker or headphones.
1 Prepare the built-in speaker or headphones.
If you want to listen using the built-in speaker,
set the
SPEAKER
switch to
ON
.
To listen with headphones, connect them to the
headphones connector.
Headphones
NOTE
When headphones are connected, sound will not be
output from the speaker even if the SPEAKER switch
is ON.
2 Press the
PLAY/PAUSE [
Á/π
] key to start
playback.
3 Adjust the volume with the /
SP OUTPUT
control.
4 Press the
STOP
[
ª
] key to stop playback.
For detailed information about playback and
convenient playback functions, see “7–Playback”
Turn the power off
Press and hold the
POWER
to turn the power off.
CAUTION
Always use the power key to turn the unit power OFF.
When the power is ON, do not remove the battery or
batteries set as the MAIN battery or disconnect the
PS-P520 adapter (sold separately) if no batteries are
installed. Doing so will cause all recordings, settings
and other data to be lost.