Tascam DR-100 - Manual (Page 48)

48
TASCAM DR-100
11–Messages
The following is a list of the popup messages that might appear on the DR-100 under certain conditions.
Refer to this list if one of these popup messages appears and you want to check the meaning or
determine a proper response.
Message Meaning and response
File Name ERR
The DIVIDE function would cause the file name to exceed 200 characters. The DIVIDE function
adds "
_a
" or "
_b
" to the end of the file name. Before choosing the DIVIDE function, connect the
unit to a computer and edit the file name to less than 198 characters.
File Not Found
The DIVIDE function would cause the file name to be the same as that of an existing file. The
DIVIDE function adds "
_a
" or "
_b
" to the end of the file name. Before choosing the DIVIDE
function, connect the unit to a computer and edit the file name.
Non-Supported
Battery Empty
The file added to the playlist cannot be found or a file could be damaged. Please check the file in
question.
I/O Too Short
The audio file is not a supported format. Please see "8–Connecting with a Computer" for file
formats that this unit can use.
The battery is almost out of power. Recharge the lithium-ion battery and/or replace the AA
batteries.
File Not Found
PLAYLIST
The IN and OUT points are too close together. Reset the IN and OUT points with at least 1 second
between them.
No PLAYLIST
The file in the Playlist cannot be found. Please confirm that the file is still in the Music Folder.
PLAYLIST Full
No files have been added to the Playlist. Add a file to the Playlist or change the play mode to
something besides
PLAYLIST
.
The playlist is full. You cannot add more than 99 tracks to the Playlist.
The card is not formatted properly or the formatting is broken. Change the card or press the
ENTER/MARK key when this message appears to format the card in FAT format.
CAUTION Execution of FAT formatting erases all data currently on the card.
Dup File Name
MBR Error Init CARD
The FAT formatting of the card is abnormal or broken. This message also appears if you FAT
formatted the card using a computer connected by USB and if a new card is inserted in the unit.
Always use the DR-100 to conduct FAT formatting of cards to be used with it. Change the card or
press the ENTER/MARK key when this message appears to format the card in FAT format.
CAUTION Execution of FAT formatting erases all data currently on the card.
Format Error
Format CARD
File Not Found
Make Sys File
The system file is missing. This unit requires a system file for operation. When this message
appears, press ENTER/MARK to automatically create a system file.
Invalid SysFile
Make Sys File
Invalid Card
Change Card
The system file required to operate this unit is invalid. When this message appears, press ENTER/
MARK to automatically create a system file.
Protected Card
Change Card
Something might be wrong with the card. Change the card.
Write Timeout
This appears when the card is protected and lacks the necessary Music Folder and other folders
and files. Unlock the write protect switch, restart the power and format the card.
Writing to the card timed out.
Backup files on the card to your computer, and format the card.