Tascam DR-100 - Manual (Page 32)

32
TASCAM DR-100
Recording an overdub
1 Select the file that you want to overdub.
2 Press the
RECORD ( º ) key to open a submenu.
3 In the
OVERDUB
submenu, set it to
ON
.
4 Press the RECORD ( º ) key to start recording.
The following error message appears if the
selected file cannot be played back.
NOTE
You cannot overdub if input monitoring is OFF or •
the PRE REC function is ON.
When overdub recording, you cannot use the
•
AUTO REC function or start new files manually.
You cannot overdub when the recording format
•
is MP3. Select WAV16BIT or WAV24BIT regardless
of the format of the playback file. (See “Preparing
with the REC SETTING menu” on page 25.) The
sampling frequency of the playback file is preserved
regardless of the sampling frequency setting for
overdub recording.
Stop overdubbing
Press the STOP ( ª ) key during recording to stop
recording and return to the start of the file.
CAUTION
You cannot pause during overdub recording.
File format (recording setting)
SD/SDHC card capacity (hours:minutes)
1GB 2GB 4GB 8GB
1:41 3:22 6:44 13:28
WAV
16bit
44.1kHz
1:33 3:06 6:12 12:24 48kHz
1:07 2:15 4:30 9:00
24bit
44.1kHz
1:02 2:04 4:08 8:16 48kHz
74:32 149:04 298:08 596:16
MP3
32kbps 44.1kHz/48kHz
37:16 72:32 149:04 298:08 64kbps 44.1kHz/48kHz
24:50 49:40 99:20 198:40 96kbps 44.1kHz/48kHz
18:38 37:16 74:32 149:04 128kbps 44.1kHz/48kHz
12:25 24:50 49:40 99:20 192kbps 44.1kHz/48kHz
9:19 18:37 37:16 74:32 256kbps 44.1kHz/48kHz
7:27 14:54 29:48 59:36 320kbps 44.1kHz/48kHz
6–Recording
Recording time