Tascam SS-R1 - Manual (Page 30)

TASCAM SS-R1/SS-CDR1 RS-232C Protocol Specification
29
TEAC Corporation
CURRENT TRACK TIME RETURN
This is the return command for the command "CURRENT TRACK TIME SENSE [58]."
It returns the current track time or the media time.
Command D8
Machine ID
0
Data 10 bytes
Description Remarks
Data 1
00：Track elapsed time
01：Track remaining time
Data 2
Time Mode
02：Media elapsed time
03：Media remaining time
Data 3 Tens digit of the
minutes
Data 4 Ones digit of the
minutes
Data 5 Hundreds digit of
the minutes
Data 6 Thousands digit of
the minutes
Data 7 Tens digit of the
seconds
Data 8 Ones digit of the
seconds
Data 9 Tens digit of the
frames
Data 10 Ones digit of the
frames
Request/Preset CURRENT TRACK TIME SENSE [58]
NAME RETURN
This is the return command for the command "NAME SENSE [59]."
It returns the name of the track.
If no name has been written for the specified track, or if the written name uses non-ASCII
characters, this returns the command "ILLEGAL SENSE REQUEST [F2]."
Command D9
Machine ID
0
Data none
Data 5
bytes～124 bytes
Description Remarks
Data 1 Tens digit of the
specified number
Data 2 Ones digit of the
specified number
Data 3 Thousands digit of
the specified
number
Data 4 Hundreds digit of
the specified
number
0001 – 0999 Track name
Data 5 – Data
124 Title Single-byte alphanumeric characters
・ The name is between 0 and 120 characters in length.
Request/Preset NAME SENSE [59]