Tascam SS-R1 - Manual (Page 16)

TASCAM SS-R1/SS-CDR1 RS-232C Protocol Specification
15
TEAC Corporation
EOM MEDIA TIME PRESET
Specifies the time (in seconds) at which the EOM (End Of Message) will give notice that the end of
media is approaching.
The range is 1 to 99 seconds, or OFF.
A return command is returned only if data [FF] is specified.
Command 33
Machine ID
0
Data 2 bytes
Data 1 Data 2 Description Remarks
0 0 EOM Media
Off
N1 N2 Number of
seconds
N1： Tens digit of seconds, N2： Ones digit of seconds
F F Sense Requests that the preset content be returned.
・ If data outside the range specified above is received, the controlled device will transmit
ILLEGAL[F2].
Return EOM MEDIA TIME RETURN [B3]
PITCH CONTROL SELECT
Specifies the Pitch Control mode of the controlled device.
A return command is returned only if Sens [FF] is specified.
The pitch control value is specified by the command "PITCH CONTROL DATA PRESET [25]."
Command 35
Machine ID
0
Data 2 bytes
Data 1 Data 2 Description Remarks
0 0 Pitch Control Off
0 1 Pitch Control On
F F Sense Requests that the preset content be returned.
・ If data other than the above is received, the SS-R1/SS-CDR1 will transmit ILLEGAL [F2].
Return PITCH CONTROL SELECT RETURN [B5]
AUTO READY SELECT
Specifies the Auto Ready mode setting of the controlled device.
A return command is returned only if Sense [FF] is specified.
Command 36
Machine ID
0
Data 2 bytes
Data 1 Data 2 Description Remarks
0 0 Auto Ready
Off
0 1 Auto Ready
On
F F Sense Requests that the preset content be returned.
・ If data other than the above is received, the SS-R1/SS-CDR1 will transmit ILLEGAL [F2].
Return AUTO READY SELECT RETURN [B6]