Tascam SS-R1 User Manual
Page 18

TASCAM SS-R1/SS-CDR1 RS-232C Protocol Specification
17
TEAC
Corporation
KEY CONTROL SELECT
Specifies the Key Control Mode of the controlled device.
A return command is returned only if Sense [FF] is specified.
The key control value is set by the command "KEY CONTROL DATA PRESET [2D]."
Command 3D
Machine ID
0
Data 2
bytes
Data 1
Data 2
Description
Remarks
0 0
Key
Control
Off
0 1
Key
Control
On
F F
Sense Requests
that
the
preset content be returned.
・
If data other than the above is received, the SS-R1/SS-CDR1 will transmit ILLEGAL [F2].
Return
KEY CONTROL SELECT RETURN [BD]
REMOTE/LOCAL SELECT
Enables or disables key operations on the controlled device's own panel.
A return command is returned only if Sense [FF] is specified.
Command 4C
Machine ID
0
Data 2
bytes
Data 1
Data 2
Description
Remarks
0
0
Remote
Only remote operation via RS-232C and wired remote
control will be enabled. Key operations on the device's own
panel will be disabled.
0
1
Local
Remote operation and key operations on the device's own
panel will be enabled.
F F
Sense Requests
that
the
preset content be returned.
・
If data other than the above is received, the SS-R1/SS-CDR1 will transmit ILLEGAL [F2].
Return
REMOTE/LOCAL SELECT RETURN [CC]
PLAY MODE SENSE
Requests that the status of the controlled device's Play mode be returned.
Command 4E
Machine ID
0
Data none
Return
PLAY MODE RETURN [CE]
MECHA STATUS SENSE
Requests that the status of the controlled device's mechanism be returned.
Command 50
Machine ID
0
Data none
Return
MECHA STATUS RETURN [D0]
TRACK No. SENSE
Requests that the current track number be returned.
Command 55
Machine ID
0
Data none
Return
TRACK No. RETURN [D5]