Tascam SS-R1 - Manual (Page 17)

TASCAM SS-R1/SS-CDR1 RS-232C Protocol Specification
16
TEAC Corporation
REPEAT SELECT
Specifies the Repeat Mode setting of the controlled device.
A return command is returned only if Sense [FF] is specified.
Command 37
Machine ID
0
Data 2 bytes
Data 1 Data 2 Description Remarks
0 0 Repeat Off
0 1 Repeat On
F F Sense Requests that the preset content be returned.
・ If data other than the above is received, the SS-R1/SS-CDR1 will transmit ILLEGAL [F2].
Return REPEAT SELECT RETURN [B7]
SYNC REC SELECT
Specifies the Sync Rec Mode setting of the controlled device.
A return command is returned only if Sense [FF] is specified.
The Sync Rec Level is specified by the command "SYNC REC LEVEL PRESET [28]."
Command 38
Machine ID
0
Data 2 bytes
Data 1 Data 2 Description Remarks
0 0 Sync Rec Off
0 1 Sync Rec On
F F Sense Requests that the preset content be returned.
・ If data other than the above is received, the SS-R1/SS-CDR1 will transmit ILLEGAL [F2].
Return SYNC REC SELECT RETURN [B8]
INCR PLAY SELECT
Specifies the Incremental Play Mode of the controlled device.
A return command is returned only if Sense [FF] is specified.
Command 3A
Machine ID
0
Data 2 bytes
Data 1 Data 2 Description Remarks
0 0 INCR Play Off
0 1 INCR Play On
F F Sense Requests that the preset content be returned.
・ If data other than the above is received, the SS-R1/SS-CDR1 will transmit ILLEGAL [F2].
Return INCR PLAY SELECT RETURN [BA]