Tascam SS-R1 - Manual (Page 11)

TASCAM SS-R1/SS-CDR1 RS-232C Protocol Specification
10
TEAC Corporation
AUTO TRACK LEVEL PRESET
Sets the Auto Track Level of the controlled device.
A return command is returned only if Sense [FF] is specified.
The Auto Track Mode setting is made using the command "AUTO TRACK SELECT [31]."
Command 21
Machine ID
0
Data 2 bytes
Data 1 Data 2 Description Remarks
0 0 Preset –24dB
0 1 Preset –30dB
0 2 Preset –36dB
0 3 Preset –42dB
0 4 Preset –48dB
0 5 Preset –54dB
0 6 Preset –60dB
0 7 Preset –66dB
0 8 Preset –72dB
F F Sense Requests that the current preset level be returned.
・ If data other than the above is returned, the SS-R1/SS-CDR1 will transmit ILLEGAL [F2].
Return AUTO TRACK LEVEL RETURN [A1]
DIRECT TRACK SEARCH PRESET
Searches for the specified track number.
When this command is received while in STOP mode or PLAY mode, the controlled device will enter
PLAY mode after searching. If the controlled device had been in any other mode when searching
began, it will remain in that mode after searching.
Command 23
Machine ID
0
Data 4 bytes
Description Remarks
Data 1 Tens digit of the
track number
Data 2 Ones digit of the
track number
Data 3 Thousands digit of
the track number
Data 4 Hundreds digit of
the track number
Track number
Example) 2301: track 123
・ If the specified track number does not exist on the disc, the SS-R1/SS-CDR1 will transmit
ILLEGAL [F2].
Return none