Tascam SS-R1 - Manual (Page 25)

TASCAM SS-R1/SS-CDR1 RS-232C Protocol Specification
24
TEAC Corporation
KEY CONTROL DATA RETURN
This is the return command in response to the command "KEY CONTROL DATA PRESET [2D]."
It returns the currently specified key control value.
Command AD
Machine ID
0
Data 2 bytes
Data 1 Data 2 Description Remarks
0
1 Key Up
Key Down
0 – 6 Key Change Semitone units
Request/Preset KEY CONTROL DATA PRESET [2D]
AUTO CUE SELECT RETURN
This is the return command in response to the command "AUTO CUE SELECT [30]."
It returns the Auto Cue on/off status.
Command B0
Machine ID
0
Data 2 bytes
Data 1 Data 2 Description Remarks
0 0 Auto Cue Off
0 1 Auto Cue On
Request/Preset AUTO CUE SELECT [30]
AUTO TRACK SELECT RETURN
This is the return command in response to the command "AUTO TRACK SELECT [31]."
It returns the Auto Track on/off status.
Command B1
Machine ID
0
Data 2 bytes
Data 1 Data 2 Description Remarks
0 0 Auto Track Off
0 1 Auto Track On
(Level)
Auto Track is executed according to the specified AUTO
TRACK LEVEL.
0 2 Auto Track On
(Digital
Direct)
Auto Track is executed according to the track data within
the S/P DIF signal.
0 3 Auto Track On
(Time)
Auto Track is executed according to the specified AUTO
TRACK TIME.
Request/Preset AUTO TRACK SELECT [31]
EOM TRACK TIME RETURN
This is the return command in response to the command "EOM TRACK TIME PRESET [32]."
It returns the time at which the EOM (End Of Message) function will give notice that the end of the
track is approaching.
Command B2
Machine ID
0
Data 2 bytes
Data 1 Data 2 Description Remarks
0 0 EOM track Off
N1 N2 Number of
seconds
N1: Tens digit of seconds, N2: Ones digit of seconds
Request/Preset EOM TRACK TIME PRESET [32]