beautypg.com

TechniSat DIGITY CI Operating Manual User Manual

Page 32

background image

7.5.2 Delete all programmes

This function allows you to delete totally the programme
memory banks.
>

Use the arrow keys up/down to mark the line Delete
all programmes
.

>

Press

OK. The message “Do you really want to delete

all programmes?” will be displayed
Use the arrow keys left/right to indicate Yes or
Abort

.

>

Confirm by pressing

OK.

Please note any messages displayed on your screen.

7.5.3 Updating software

In addition, you have the facility to update the operating
software of your receiver via satellite (ASTRA 19° East).
>

Use the arrow keys up/down to mark the item
Update software.

>

Press

OK. The sub-menu Update software will be

displayed.

(Fig. 7-15)

To update your software, mark the item Update
software.

>

Use the

OK key to switch the software update function

On.

>

Press the

Menu key to return to normal operation.

In order for the new software to be downloaded

overnight, the receiver must remain in stand-by

mode.The download procedure is indicated by a

blinking LED light on the unit.This procedure

must not be interrupted by switching the unit on

or off, nor may it be disconnected from the mains

power supply.
>

To start the update of the operating software manually,
press the red function key (Test) in the menu
Software Update .
To download any new software that may be available,
follow the instructions displayed on your screen.

Should the parameters of the data channel used to download
software updates have changed, you can correct them in this
menu as described under Point 7.4.3 (manual programme
search). Current transponder data can be obtained from your
specialist retailer. In general, however, you should not make
any changes in this menu.
Note:

This function should not be activated if you have

made changes in the menues “Basic Settings”

and “LNB configuration”, as any changes made

there would be deleted when this function is

performed, and you would have to repeat the

changes there

32

(Fig. 7-15)

bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 32