TechniSat S1 - Manual (Page 49)

8-10)
> Use the
up/down arrow keys to move the marker
around within the menu, and change the individual
positions. When selecting a menu item please note
any additional messages displayed on screen.
8.3.1 Changing the unit PIN
The unit PIN code is set at the factory to
0000.
> Press
OK to display the menu used to change the
unit PIN code. (Fig. 8-11)
> Now use the
numeric keys to enter the current unit
PIN code (
Default setting 0000).
> Using the
numeric keys, enter the desired new unit
PIN code.
> Repeat the code entry.
> When you have completed changing the unit PIN
code in this manner you will automatically be taken
back to the Parental Control menu.
Note!
Do not forget your unit PIN code. If you should forget
it, please consult your specialist retailer!
8.3.2 Mode
> In this line, use the
left/right arrow keys to select
parental control
on or off.
8.3.3 Selecting a programme
> Press
OK. The Favourites list of the current mode (TV
or Radio) will be displayed. The currently selected pro-
gramme is marked. (Fig. 8-12)
> Press the
green function key to switch between the
TV and Radio lists.
> Press the
red function key to open a selection win-
dow. Here you have the choice of selecting the des-
ired programme list type.
> Use the
up/down arrow keys to select the desired
programme type (e.g. Favourites list).
> Confirm by pressing
OK. The programme list selected
will be displayed.
> Now use the
arrow keys to mark the programme to
which you wish to block the access.
> Block the programme by pressing the
yellow function
key. The parental control symbol will appear next
to the programme selected.
> To block several programmes simultaneously, mark
these as described in Point 8.1.2 (Marking blocks of
programmes) and block them by pressing the
yel-
low function key.
> When you have completed configuring the programme
49
(Fig. 8-5)
Bed_anl_.qxd 20.02.04 16:29 Seite 49