Tascam DP-01FX/CD - Manual (Page 83)

DP-01FX/CD Appendix
TASCAM DP-01 Owner’s Manual
83
Messa
ges
Import File Too
Big "The import file is too big."
The size of the file to import equals or exceeds the free space on hard disk when executing
an import in the CD IMPORT menu.
Create more free space on hard disk by DEL/UNUSED, for example, to ensure sufficient
free space for reading the import file.
Invalid CD Insert
Backup CD "An invalid CD has been inserted. Insert the backup CD."
A CD not written with backup data has been inserted in the CD RESTORE menu.
Insert a CD written with backup data.
Invalid CD Insert
Blank CD "An invalid CD has been inserted. Insert a blank CD."
A CD other than a blank CD has been inserted when writing to CD by the MASTER
WRITE, CD BACKUP or CD EXPORT menu. (This is also displayed when a finalized
CD has been inserted when writing by Track at Once.)
Insert a blank CD.
Invalid CD Insert
CD-RW "An invalid CD has been inserted. Insert a CD RW."
A CD R or other CD that cannot be erased has been inserted in the CD RW ERASE
menu.
Insert a CD RW to be erased.
Invalid CD Insert
Import CD "An invalid CD has been inserted. Insert the import CD."
An audio CD, blank CD or other invalid CD has been inserted in the CD IMPORT menu.
Insert a CD written with import data.
Invalid CD Insert
Opened CD "An invalid CD has been inserted. Insert a non finalized CD."
A CD that cannot be finalized has been inserted in the finalize menu.
Insert a CD to be finalized.
Low Capacity
Insert Blank CD "A CD with low capacity has been inserted. Insert a blank CD with adequate capacity."
The capacity of the CD was less than the data to be written when an attempt was made to
make two or more CDs having the same content after ending MASTER WRITE (Disc at
Once) to CD, CD BACKUP or CD EXPORT. (This message is displayed, for example,
when writing is executed with the CD capacity at 700 MB and the data capacity at 700
MB at the initial write, and a 650 MB CD is inserted after "Another CD?" is displayed
after writing ends.)
Insert a blank CD having adequate capacity.
MASTER WRITE
Insert Blank CD "Insert a blank CD."
The CD tray was opened after preparation for writing to CD was completed in the MAS
TER WRITE menu.
Insert a blank CD and close the CD tray.
No Disk Insert
Backup CD "A CD has not been inserted. Insert the backup CD."
There is no CD in the CD tray in the CD RESTORE menu.
Insert a CD written with backup data.
DP-01_OM_E.book 83 ページ ２００５年６月１３日 月曜日 午後７時１４分