Tascam DP-01FX/CD - Manual (Page 49)

Advanced techniques
TASCAM DP-01 Owner’s Manual
49
Usi
ng the USB conne
ction
Exporting the mastered stereo tracks
When you have finished mastering (see “Mastering” on page 27),
you may want to save the mastered stereo mix, otherwise it will be
overwritten when you next perform a mastering operation.
Before you start this operation, make sure you have loaded the song whose
mastered mix you will be exporting (and that it does indeed contain a stereo
mastered mix).
1 Press MENU and select the WAVE menu.
If there is no mas-
tered mix, the dis-
play will inform you.
2 Select the EXPORT MSTR action and press the key. The display shows
a default file name for you to edit:
Press EXIT if you
want to cancel the
export operation.
3 Use the left and right cursor keys and the jog wheel to name the
exported mastered stereo mix (“Titling” on page 15).
4 When you’re done, press ENTER to export the mastered stereo mix (as
a single 16-bit 44.1kHz stereo WAV file).
The file is exported with the name you just entered, and a .WAV exten-
sion.
5 Connect the DP-01 to the computer and “open” the drive (““Open”
and “Close”” on page 45).
6 Use the PC operating system to copy or move the exported mastered
mix file or files from the
WAVE directory of the DP-01 FAT partition to
the PC.
Once the file or files are on the PC, you can “close” the DP-01.
DP-01_OM_E.book 49 ページ ２００５年６月１３日 月曜日 午後７時１４分