2 : advanced techniques, Location – Tascam DP-01FX/CD User Manual
Page 28
28
TASCAM DP-01 Owner’s Manual
Advanc
ed techn
iques
2 : Advanced techniques
The operations described here are ones that you may use less often
than the ones described earlier in this manual, but you will find use-
ful in your work with the DP-01.
Location
This section tells you how to jump around to different parts of a song
on the DP-01.
Direct location
The DP 01 displays the current position at the top of the display as
hours:minutes:seconds:frames. There are 30 frames in a second.
The DP-01 can also
display the current
time in bars and beats. See “Work-
ing in bars & beats” on page 36 for
details.
From the “home screen” when the DP-01 is stopped, turn the jog
wheel, so that the top time display blinks.
Use the
and
cursor keys to move the underline cursor between
the different fields of the time shown at the top of the screen. In this
case, the seconds field is selected.
To change the value of the highlighted (underlined) field, use the jog
wheel. Fields “wrap round”, so going from 59 seconds to 0 seconds
adds 1 to the minutes, etc. As you turn the jog wheel, the display
blinks. If you leave the jog wheel untouched for a few seconds, or if
you press
ENTER
, the display stops blinking.
If you want to edit another field, use the cursor keys to move to that
field and then use the jog wheel to get to the time you're looking for.
Press
PLAY
to start playback from the position whose value has just
been entered.
Location marks
The DP-01can store up to 999 location marks per song! Use these
to mark the start of verses, vocal entry points, etc.
Marks are num-
bered in the order
you enter them, not according to
their position in the song. Mark 999
can therefore appear in a song
before mark 001.
To set a location mark
(while stopped, recording or playing), press
the
INSERT
key, or press and hold the
SHIFT
key and press the
LOCATE
(
SET LOC
) key at the point where you want the new mark.
Marks are shown on the display on the second line of the “home”
screen. The mark number you see is the one at or immediately before
the current position In the example below, “M023” indicates the
twenty-third mark in the selected song.
DP-01_OM_E.book 28 ページ 2005年6月13日 月曜日 午後7時14分