Advanced techniques – Tascam DP-01FX/CD User Manual
Page 51
Advanced techniques
TASCAM DP-01 Owner’s Manual
51
Abou
t tra
ck edi
ting
Track editing functions
The track editing functions available on the DP 01 are:
• COPY->PASTE
• COPY->INSERT
• MOVE->PASTE
• MOVE->INSERT
• OPEN
• CUT
• SILENCE
• CLONE TRACK
• CLEAN OUT
COPY -> PASTE
This function takes the section of a track or tracks marked by the IN
and OUT points, copies it, and pastes it at the TO point on the cho-
sen track or tracks.
The original source is left unchanged.
The copy operation overwrites anything which is already recorded at the
destination. The track is the same length as it was before the operation.
You can copy the section more than once in one operation.
You can change the following values:
Src.Trk
This sets the source track or tracks from which the section is cop
ied. Choose
1
through
8
to select an individual track. Choose
1/2
,
3/4
,
5/6
or
7/8
to select a pair of tracks. Choose
1-8
to select all tracks.
Dst. Trk
This sets the destination track or tracks to which the selected
section is pasted. What you can select here depends on what you have
selected for the source track. If you have selected a single track, you can
select tracks
1
through
8
here. If you have selected a pair of tracks (for
instance,
1/2
), you can only select track pairs here. If you have selected all
tracks (
1-8
), then
1-8
is the only option available to you here.
Times
This is the number of times that the selected section is pasted into
the destination track or tracks. You can set this value from
1
to
99
.
Press
YES
to perform the operation or
NO
to leave this screen.
COPY -> INSERT
This function takes the section of a track or tracks marked by the IN
and OUT points, copies it, and inserts it on the chosen track or
tracks, as new material, starting at the TO point.
The original source is left unchanged.
The insert operation adds the selected section as new material to the desti
nation. Nothing is overwritten at the destination, as any existing material
following the TO point is moved to the end of the newly inserted section.
The track is now longer than it was before the operation.
You can copy the section more than once in one operation (for example, to
repeat a verse/chorus section).
Figure 2.4: Copy and paste
OUT
IN
TO
OUT
IN
TO
Figure 2.5: Copy and insert
OUT
IN
TO
OUT
IN
TO
DP-01_OM_E.book 51 ページ ２００５年６月１３日 月曜日 午後７時１４分