Tascam DP-01FX/CD - Manual (Page 31)

Advanced techniques
TASCAM DP-01 Owner’s Manual
31
EQ settings
EQ settings
This can help you
emphasize the par-
ticular frequency ranges on a track.
On the DP-01, you can set the frequency at which the EQ HIGH and
EQ LOW controls work; individually for each channel.
1 Press MENU , and then select the PREFERENCE menu.
The NSP setting is
only available on
the DP-01FX and DP-01FX/CD.
The DP-01 will not show this option.
2 Use the arrow keys to scroll to EQ FRQ :
3 Press the cursor key:
4 Use the cursor keys and wheel to set these parameters.
Source This is the track affected by this setting, from Track1 through
Track8 .
High This is the frequency for the EQ HIGH control. Choose from 1.7, 1.8,
1.9, 2.0, 2.2, 2.4, 2.6, 2.8, 3.0, 3.2, 3.4, 3.6, 3.8, 4.0, 4.5, 5.0, 5.5,
6.0, 6.5, 7.0, 7.5, 8.0, 9.0, 10, 11, 12, 13, 14, 15, 16, 17, 18 (all mea-
sured in kHz).
Low This is the frequency for the EQ LOW control Choose from 32, 40, 50,
60, 70, 80, 90, 100, 125, 150, 175, 200, 225, 250, 300, 350, 400,
450, 500, 600, 700, 800, 850, 900, 960 (Hz), 1.1, 1.2, 1.3, 1.4, 1.5, or
1.6 (kHz).
DP-01_OM_E.book 31 ページ ２００５年６月１３日 月曜日 午後７時１４分