TP-Link TD-W8960N - Manual (Page 83)

TD-W8960N Wireless N ADSL2+ Modem Router User Guide
¾ Beacon Interval: Enter a value between 20-1000 milliseconds. The Beacon Interval value
indicates the frequency interval of the beacon. A beacon is a packet broadcast by the Router
to synchronize the wireless network. The default value is 100.
¾ Transmit Power: This option will allow you to configure the wireless transmit power. High
transmit power will extend the wireless signal range of the device and make the signal
transmit more legible. Low transmit power with the smaller wireless signal range that will
decrease the probability of interrupt by other Wi-Fi device.
¾ WMM (Wi-Fi Multimedia): This function can guarantee the packets with high-priority
messages being transmitted preferentially. It is strongly recommended.
4.5.6 Station info
Choose “Wireless”Æ” Station info”, you will see the screen of Wireless-Authenticated Stations
setting shown as below.
Figure 4-95
This page shows authenticated wireless stations and their status.
¾ MAC: Displays the connected wireless station's MAC address.
¾ Associated: Displays whether the wireless station has associated with the access point.
¾ Authorized: Displays the information of Authentication.
¾ SSID: Displays the connected wireless station's SSID.
¾ Interface: Displays the connected wireless station's Interface mode.
4.6 Diagnostics
Choose “Diagnostics”, you will see the Diagnostics screen. This section describes the result of
the test for the ENET (Ethernet) Connection, Wireless Connection and ADSL Synchronization.
You can refer to the Help menu to get more information about the corresponding test.
76