TP-Link TD-W8960N - Manual (Page 43)

TD-W8960N Wireless N ADSL2+ Modem Router User Guide
Figure 4-28
To add a new DMZ Host:
You can enter the computer's IP address and then click Save/Apply to activate the DMZ host you
set on this page.
)
Note:
DMZ host forwards all the ports at the same time. Any PC whose port is being forwarded must
have its DHCP client function disabled and should have a new static IP Address assigned to it
because its IP Address may change while using the DHCP function.
4.4.6 Security
Choose “Advanced Setup”Æ“Security”, and you will see the security screen including IP
Filtering
and MAC Filtering (only effective in Bridge mode) submenus.
Figure 4-29
4.4.6.1 IP Filtering
The IP address filtering feature makes it possible for administrators to control user's access to the
Internet, which is based on user's IP. The IP address filtering includes Outgoing and Incoming,
the detailed descriptions are provided below.
IP Filtering - Outgoing
Choose “Advanced Setup”Æ“Security”Æ“IP Filtering”Æ“Outgoing”, you can configure
Outgoing Filtering rules on the screen (shown in Figure 4-30).
The Outgoing IP Filtering feature allows you to control some IP traffic from LAN to access to some
specifically addresses. By default, all outgoing IP traffic from LAN is allowed, but some IP traffic
can be BLOCKED by setting up filters.
36