3 dmz host, Figure 4-27) – TP-Link TD-W8960N User Manual

Page 42

TD-W8960N

Wireless N ADSL2+ Modem Router User Guide

Figure 4-27

2. Select the application from the drop-down list. If the list does not have the application that

you want, select the Custom application radio-button, and type the name of the custom
application in the text box.

3. Enter

the

Trigger Port Start

, Trigger Port End, Open Port Start and Open Port End in the

table, and then select the Trigger protocol and Open protocol, TCP, UDP or All.

4. Click Save/Apply to enable the settings.

)

Note:

If you select the application from the drop-down list, the External Port Start, External Port End,
Internal Port Start, Internal Port End and the Protocol will be added in the table automatically.

4.4.5.3 DMZ Host

Choose “Advanced Setup”Æ“NAT”Æ“DMZ Host”, you can set up DMZ Host on the screen
(shown in Figure 4-28).

The DMZ host feature can make a local host be exposed to the Internet for a special-purpose
service, such as online gaming or video conferencing.