5 nat – TP-Link TD-W8960N User Manual
Page 38
TD-W8960N
Wireless N ADSL2+ Modem Router User Guide
Figure 4-22
Type the new value for the WAN Interface who’s MAC Address you want to change, and click
Save/Apply
.
You can select corresponding WAN Interface from the drop-down list and click Clone button to
clone your current PC MAC, and then click Save/Apply.
Click Restore Default button to restore the WAN Interface’s default MAC Address.
)
Note:
Only the WAN Ports can using MAC Address Clone function. All the clone MAC Address must not
be the same with each other.
4.4.5 NAT
NAT (Network Address Translation) allows you to share one WAN (Wide Area Network) IP
address for multiple computers on your LAN (Local Area Network).
Choose “Advanced Setup”Æ“NAT”, there are four submenus under the main menu: Virtual
Servers
, Port Triggering and DMZ Host. Click any of them, and you will be able to configure the
corresponding function.
Figure 4-23
)
Note:
When you select PPPoA or PPPoE for the WAN Setup, or when you select Enable NAT for the
type of
IPoA
and IPoE connection (
), you will see the NAT menu in the
Web-based Utility (shown in Figure 4-23).
31